How to install ceiling hanging boards of different light fixture?

In our life,Fixture lighting has become an indispensable item in our lives. The installation methods of ceiling hanging boards of different lamps are different, but the general steps are roughly the same.

Before installing the light fixture, you need to prepare the following tools and materials:

Lighting fixtures
Ceiling hanging board
electric drill
screwdriver
spirit level
Electrical wire cap or tape

Determine the installation location

The installation location of the lamp should be determined according to the type and function of the lamp. For example, chandeliers are usually installed in the center of a room, while ceiling lights are usually installed on the ceiling. When determining where to install, you also need to consider the size and shape of the fixture, as well as the overall layout of the room.

Install ceiling hanging panels

Use a pencil and ruler to mark on the ceiling where the ceiling cladding panels will be installed.
Use an electric drill to drill holes in the ceiling that match the size of the screw holes in the ceiling cladding.
Fix the ceiling hanging plate to the ceiling and tighten the screws.
Use a level to check whether the ceiling cladding is level.

Connect the wires

Connect the lamp wires to the power cord and insulate them with wire caps or tape.
Thread the light fixture wires through the holes in the ceiling panel.

Install lighting fixtures

Fix the lamp to the ceiling hanging plate and tighten the screws.
Install the lampshade or other light fixture components.

Turn on the power

Turn on the power and check whether the lamp is working properly.

Here are some ways to install ceiling panels for different types of lamps:

chandelier

Ceiling panels are usually round or square in shape and have hooks.
Secure the hook to the ceiling and tighten the screws.
Hang the light fixture's chain or sling from the hook.

ceiling lamp

Ceiling panels are usually square or round with holes for screws.
Fix the ceiling hanging plate to the ceiling and tighten the screws.
Fix the lamp to the ceiling hanging plate and tighten the screws.

wall lamp

Ceiling panels are usually square or rectangular with holes for screws.
Fix the ceiling hanging plate to the wall and tighten the screws.
Fix the lamp to the ceiling hanging plate and tighten the screws.

Precautions

Before installing the lamp, please read the lamp manual carefully and understand the relevant safety precautions.
Wear insulating gloves and safety glasses when installing light fixtures.
When connecting wires, use appropriate wiring tools and materials.
Make sure the light fixture is securely mounted and not loose or wobbly.
If you need to replace the lamp, please turn off the power before doing so.

Conclusion
   Whether it is a chandelier, ceiling light or wall light, the ceiling plates are very different, but the installation steps are mostly the same. Different lamps have different ceiling plates.Need to choose the appropriate hanging plate according to the volume and weight of the chandelier itself.
    If you have any requirements for chandelier ceiling panels in our store, please contact us. Based on your needs, we can assess whether the chandelier can withstand its siding and decide whether to follow your suggestions.