How to maintain floor-standing lamps?

      As part of home decoration, floor lamps can not only provide lighting, but also enhance home taste. In order to maintain the beauty of floor lamps and extend their service life, proper maintenance is required.The key step in maintaining floor lamps is moisture-proof. Whether it is placed in the living room or used with sofas and coffee tables, moisture-proof lampshades must be installed to prevent moisture from invading, causing rust damage or leakage short circuits.

When cleaning and maintaining, disconnect the connected power supply first. At the same time, be careful not to change the structure of the lamp, and do not replace the parts of the lamp casually. After cleaning and maintenance, the lamp should be installed as it is, and do not miss or install the wrong parts of the lamp to avoid danger.Regular dust removal:

Lampshade: Lampshade is easy to accumulate dust, affecting the lighting effect. You can use a feather duster to gently brush off the dust, or wipe it with a semi-wet soft cloth.

Lamp body: Metal lamp body can be wiped with a dry cloth, non-metallic lamp body can be wiped with a wet cloth and then wiped dry with a dry cloth. Be careful to avoid the power cord.

Moisture-proof treatment:

Floor lamps are prone to rust or damage in a humid environment. Avoid placing floor lamps in humid places, and check the lamp body regularly for signs of rust.

Pay attention to electrical safety:

Be sure to disconnect the power supply before cleaning.

Check the power cord regularly for damage, and replace it in time if it is damaged.

Do not disassemble the lamp at will to avoid damage.

Avoid frequent switching:

Try not to switch on and off frequently when using lighting, because the current passing through the filament is greater than the current during normal operation when the lighting is frequently started, which makes the filament temperature rise sharply and accelerate sublimation, thereby greatly reducing its service life. This is also a point that all lighting maintenance should pay attention to.

Choose the right detergent:

When cleaning, do not use highly corrosive detergents to avoid damaging the surface of the lamp body.

Maintenance tips:

The material determines the cleaning method: Different materials have different cleaning methods, such as metal, glass, fabric, etc.

Gentle wipe: Use gentle force when cleaning to avoid scratching the surface of the lamp body.

Pay attention to the type of bulb: Different types of bulbs have different maintenance methods, such as energy-saving lamps, LED lamps, etc.FAQ:

What should I do if the floor lamp shade turns yellow?

You can try to wipe it with toothpaste or a small amount of alcohol, but be careful not to use too much force.

What should I do if the floor lamp shade is broken?

If the damage is not serious, you can temporarily repair it with transparent tape, but it is recommended to replace it as soon as possible.

What should I do if the floor lamp is not lit?

First check whether the power is on, and then check whether the bulb is damaged. If there are no problems with the above, it is recommended to contact a professional for repair.

Tips:

Regular inspection and maintenance are the key to keeping the floor lamp in good condition.

If the floor lamp fails, it is recommended to contact a professional for repair.